9
Technical Specification:
MODEL
HEIGHT
WIDTH
DEPTH
BANFF3
670MM
460MM
355MM
INSTALLATION REQUIREMENTS:
BANFF/BANFF3:
This product has been designed to be freestanding against a flat wall or chimney
breast.
(Heater unit cut
-
out)
(This is a safety feature, to safe guard against further damage to
the product).
If the airflow is restricted the heater will automatically turn off. This is can occur due to
incorrect installation or obstruction.
To reset the heater function:
•
isolate from the mains power supply.
•
Leave product to cool.
•
After a suitable cooling down period, remove the obstruction if obstructed, and check
installation.
•
After 10 minutes the thermo switch (cut
-
out) in the heater will reset.
Please note that both the effect fan and heater fan omit a low decibel noise, both of
which are normal operating characteristics.
