Front Glass Removal:
To remove the front glass and install the log set, the below steps must be taken.
1. Remove the two screws located in the bottom glass
retaining bar.
2. Remove the bottom glass retaining bar.
3. Remove the glass by pulling the second retaining bar away from the body of the fire, ensure that the glass is supported at all
times. A suction cup has been provided to help aid this step.
(Please note the suction cup is provided for support only, not to hold the full weight of the glass).
(Please note: it is recommended that this step is carried out by two persons on E1500gf/2/3 & E1800gf/2/3 models).
Suction Cup
4. Place the log set as stated and replace the glass by
reversing steps 3. to 1.
6
