Packing Contents
USB 3.0 to HDD enclosure
or USB 3.1
to HDD enclosure
Power Adapter
User manual
USB 3.0 cable or USB 3.1 cable
Hardware Setup
•
Connect your hard disk drive properly to the port connector on
the HDD enclosure
•
Connect the enclosure to your computer by USB cable
•
Connect the power adapter to the enclosure and power up the
enclosure
•
The computer should now detect the new hardware .For
Windows2000/XP/VISTA/7/8/10, no driver setup is necessary ,
Please Proceed to step 6.0 to
format your drive.
Note:
Should use adapter to power up the enclosure before
Plugging the USB port; otherwise it may malfunction.
Hardware Installation
Windows 2000/XP/VISTA/7/8/10
·No driver installation is necessary.
·The enclosure will be found on your computer automatically.
IMPORTANT
: Each time before unplugging the HDD enclosure
from your computer, Should stop the hardware from the system
tray (located at the right
-
bottom corner of your computer screen),
If you directly pull out the USB cable without STOP operation, it
may cause data loss or hardware damage.
Format your Hard Drive
For an un
-
partitioned or un
-
formatted new HDD drive, it
normally does not automatically appear in “My Computer” the first
time. Please follow these steps:
Windows 2000/XP/VISTA/7/8/10
Step 1:
Right click on the “My Computer” icon,click ”Manage” to
initialize the Disk Management program.You can also click “Start”
