29
3: Month/Day/Year
The default value is 1.
DATETIME=2020/01/01
13:27:52 //
Date and time setting in format: “Year. Month. Day. Hours: Minutes: Seconds.
Set according to the current date and time.
CAM_NAME=CAM001
//
Camera name setting, displayed on the photos, maximum of 6 characters.
Example: CAM_NAME=Camera
Save file/change setting:
When you have set all the parameters, save the syscfg.dat file on the SD card. Turn off
the
device
–
the switch is in the “OFF” position, insert the SD card and follow the following steps:
7.
Connect the camera to a power source or insert charged batteries.
Place the switch to the “OFF” position and insert the SD card into the device. In order
to
change the parameters, the
SYSCFG.TXT
file must be saved on the SD card and the first
parameter must be set as follows:
UPDATA=1
8. Turn on the camera and place the switch to the “ON” position. On the front panel, the
green light flashes once and then the red light flashed twice to confirm that the new
setting has been saved.
9.
After saving the setting, the
UPDATA
parameter in the
SYSCFG.TXT
is set back to “0”.
The next time the device is turned on, the parameters will not be overwritten.
2.3 Turning on the camera
Once you have completed the setting, you can activate the camera. When the
camera detects motion, it will take photos or record videos as specified in the
settings. Activate the camera by placing the switch from the “OFF” to the “ON”
position. The green LED flashes once and the camera is ready for use. When the
PIR sensor detects movement, the camera will take a photo/record a video.
Summary of Contents for StrongVision Mini
Page 1: ...MANUAL MODEL StrongVision Mini ...
Page 64: ......
