Evolveo StrongVision 2GA, Manual

Page: 9 / 32

BATTERIES
CONT ......
IF USING 6V DC
POWER SOURCE
- - �
1. Remove the rubber port
cap at the bottom of the
camera . Using a universa!
6 V DC cord, plug in to the
bottom port option.
2. Run the cord to the side � - -�� - -��-
of the camera where there
is a hook provided behind
the hinge of the camera
door. This will support the
power cord and take
pressure off of the
connection point
3. When not in use, replace
the rubber port cap at the
bottom of the camera to
protect the 6 V DC
universa! plug-in port.
08