Evolveo SportCam W8, User Manual

Page: 24 / 111

Initial Set Up
1. Install a microSD memory card (64 GB max , class 6 or higher) into the
camera. Contact surface of the card is towards the lens. Use your fingernail to
insert the camera into the slot until it clicks into place. On the card there should
not be saved any data from other devices. Before first use of the microSD card in
the camera, it is recommended to format the card in your computer.
2. Install battery into the camera.
3. Charging the battery - to charge, connect the included USB cable to the
camera and connect the other end of the cable to a power source such as USB
charger, your PC or NB.
There will no damage to the card or camera occur if you disconnect it from the
power source before it is fully charged.
If the camera does not operate during the initial start-up, charge the battery for 3
hours at least.
Turn ON /OFF:
Turn ON
Turn on the camera by pressing the Power button for at
least 3 seconds until the red LED flashes. Then the LCD
display will turn on.
Turn OFF
Turn the camera off by pressing the Power button in the
standby mode for at least 3 seconds.
To save power, the camera will automatically turn off if no
button is pressed for more than 3 minutes in standby mode.
This interval can be changed in the Settings Menu.
Video recording:
To Start a
record
Press the Video Record button .
While recording the red LED indicator flashes.
To Stop a
record
Press the Video Record button again to stop recording.
Note: The camera automatically stops recording when the memory card is full or
the battery is empty.
Your video will be saved before the camera powers off.
Taking Still photos:
To take a
photo
Press the Photo button . The shutter "clicks".
23