Evolveo RoboTrex H5, User Manual, Page: 23 / 29


Black furniture may not be properly detected due to the physical nature of infrared
sensors. This may cause a slight impact, which will be reduced by the front bumper.
TIME SETTING

Press the "CLOCK" button on the remote control to enter the "Time Setting" mode, use
the directional buttons to adjust the time (HH: MM).

Press the "CLOCK" button again to confirm and save the set time.

Successful time setting will be confirmed by a beep sound on the vacuum cleaner.
SCHEDULE CLEANING

The vacuum cleaner will always start cleaning at the set time.

Press the "PLAN" button on the remote control to enter the "Schedule Cleaning"
mode.

Use the directional buttons at the top half of the remote control display (HH: MM) to
set the start for the schedule cleaning.

Press the "PLAN" button again to confirm the set time of the "Schedule Cleaning".

To erase the set time, turn the vacuum cleaner off
(the main on/off switch).

Successful schedule cleaning setting will be confirmed by a beep sound on the
vacuum cleaner.
REMOTE CONTROL CHARGING STATION
1 Start/Stop the operation 7 Cleaning along the walls
2 Schedule cleaning setting 8 Return to the charging station
3 Spiral cleaning 9 Remote control sensor
4 Display 10 Charging contact
5 Directional buttons 11 230 V input
6 Clock setting 12 Charging connector