Please do not attempt to perform repairs or conversions of the
plug-in card. Avoid contact with the power grid. The product is
only voltage-free once it has been unplugged. Always ensure
that you are grounded before you touch electronic
components. This will prevent damage caused by electrostatic
discharge from your body.
Electrostatic discharge (ESD) can cause irreparable damage to
your plug-in card and all the connected hardware components!
The installation of the plug-in card is performed at your own
risk. Please have the installation of the card performed by a
specialised company if you do not have any technical and
practical experience in the field of computer and electrical
technology. The manufacturer cannot be held liable for any
direct or indirect damage caused by improper installation or
use. It is the customer’s responsibility to back up any data.
The device has not been approved for outdoor use. It should
therefore only be used in dry areas. Protect it against high
humidity levels, water and snow. Always keep the device away
from high temperatures. Do not expose the device to any
sudden temperature changes or strong vibrations, as this
could damage the electronic components.
Check the device for possible damage before using it. The
device should not be used when it has been subjected to
impact or damaged in any other way. Please also take the
national regulations and restrictions into account. Do not use
the device for any purposes other than those described in
these instructions.
