Pairing the programmable buttons on the remote
control with the TV remote control:
Press the black “On” button for 5 seconds until the indicator is
permanently on.
Press the programmable button to which you want to load the
code.
Position the remote controls opposite each other with a distance
of 3-5 cm between them so that the IR diodes point towards each
other. We recommend that you perform this on a table to avoid
interrupting the signal during copying.
Press and hold the button of the remote control the function of
which you want to copy until the diode on the programmable
remote control flashes 3 times and thus confirms receiving the
code.
In case of an error while loading the code the diode flashes 5
times - repeat the process.
To end pairing, press any button other than those with the
programming function.
