- 17 -
Picture 3.13 Tour between Points Settings
2
）
Call-up Tour lines between Points
Click the Page Switch button (refer to Picture 3.10) to enter the PTZ control menu as shown in
Picture3.12. Input the number of the tour line in the value blank, then click “Tour between Points”
button, PTZ will begin to function according to the tour lines that are set. Click the Stop button to
stop touring.
2. Scan
The PTZ will work using the preset pattern line repeatedly.
1
）
Scan setup
Step1
：
As shown in Picture 3.10, click the Set button
Step2
：
Click Pattern button
，
as shown in Picture 3.14, input the scanning values in the Pattern
value blanks
Step3
：
Click Begin button and you can set the following items: Zoom
、
Focus
、
Aperture
、
Direction and so on (refer to Picture 3.10). Click Set button and you will be returned to the PZT
configure window, refer to Picture 3.14
Step4
：
Click End button to complete setup and then click the right mouse button to exit.
Cruise Button
Cruise Line Blank
Preset Points Blank
Summary of Contents for Detective A4Ci
Page 1: ...INSTRUCTION MANUAL en...
