EN
EVOLVEO wireless outdoor siren
Installation
1. Not connected
7. Not connected
2. Tamper protection (magnet)
8. Not connected
3. On/Off, main switch
9. Power
4. CODE
switch
10. Not connected
5. Not connected
11. Battery
6. Built
-
in siren
EVOLVEO Alarmex -
pairing with the main unit
•
turn the siren on, Main switch (On/Off), there is an acoustic and light signal in three
seconds
•
enable the external siren in the main unit by sending an SMS in the format
123456#92#1#
•
press
and
hold
the CODE
switch
on the
siren
for
about
3
seconds
and
the main
unit
turns
to the pairing
mode
and
the LED
indicator
lights
up
•
activate the alarm, e.g. by pressing the SOS button on the key control (remote
control)
•
successful pairing is confirmed by an acoustic and light siren
signal
•
the
siren
is
paired
with the main
unit,
press
the CODE
switch
on the
siren
for 3
seconds,
there will
be
an
acoustic
and light
signal
•
the siren is ready to
use
EVOLVEO Sonix -
pairing with the main unit
•
connect the transmitter to the terminal panel EVOLVEO Sonix and contacts for mini
si
ren
•
remove the white connector, shave the ends of the cables approx. 3
-
5mm, the cable with the black stripe on GND, the white on the siren
contact.
•
turn the siren on, Main switch (On/Off), there is an acoustic and light signal in three
seconds
•
press
and
hold
the CODE
switch
on the
siren
for
about
3
seconds
and the
main
unit
turns
to the pairing
mode
and
the LED
indicator
lights
up
•
activate the alarm, e.g. by pressing the SOS button on the key control (remote
control)
•
successful pairing is confirmed by an acoustic and light siren
signal
•
the
siren
is
paired
with the main
unit,
press
the CODE
switch
on the
siren
for 3
seconds,
there will
be
an
acoustic
and light
signal
•
the siren is ready to
use
RESET the siren
by pressing and holding the
CODE
switch for about 6 seconds. Reset is confirmed by a double beep and the siren is set to the default settings.
Technical specification
Power supply: battery 7.2 V
Operating temperature: +10°C
～
+40°C / humidity ≤ 90% rh
Copyright © 2014
ABACUS Electric spol. s
r.o.,
All rights
reserved.
Design and specification can be changed without prior notic
e.
Printing errors reserved.
