Things to check if the showerhead won’t resume
normal flow.
Trouble Shooting
www.thinkevolve.com
1.
Try pulling the cord.
The water may have already been warm
or someone may have recently taken a shower. Either of these
events may have placed the showerhead in trickle mode.
2.
A washer from your previous showerhead
may be blocking the water’s flow.
Remove the
showerhead and check the valve by inspecting
the end that connects to the shower pipe. If the
valve is clear, you will see a set of circular holes
creating a flower pattern around a copper stem.
If the valve is blocked, remove the obstruction
and re-install the showerhead.
3.
Your water pressure may be below 30 psi.
This can happen in homes that have lower water pressures or
if you are on a well. The showerhead requires static water
pressure of at least 30 psi to function properly.
clear valve
no blockage
