Assembly
Installing the Screen
The OLED screen mounts to the DNA 75 using an 8 pin ZIF socket and a flexible cable to allow for design
flexibility. The cable can be bent or folded (once) but care should be taken to not apply tension or strain
to the area where the cable attaches to the screen itself.
Step 1: Locate the ZIF connector on the DNA 75
PCB
Step 2: Carefully and gently lift the locking tab on
the rear of the connector to vertical
Step 3: Fully insert the flexible cable into the front
of the socket with the contact side towards the
PCB
Step 4: Close the locking tab and press until the
connector gently clicks. Remove the clear screen
protector by pulling on the colored tab.
