7.
Setting the MIDI Transmit Channel
The MIDI channel can be set for each rotary controller individually.
To do this press the
CHANNEL ASSIGN button. The channel the currently selected rotary dial is assigned to will flash
on the LED display. For example, if the last selected dial is currently assigned to channel 1, the
LED display will flash ‘c1’. Increment or decrement the channel using the numeric keypad, or the
‘+’ and ‘-‘ buttons.
8.
MIDI OUT FROM USB
The MIDI output connector is normally used to send MIDI data from the UC16. If the UC16 is
connected to a computer using USB the MIDI Out can also be used to send data received from
USB.
Pressing both MIDI OUT FROM USB buttons flashes the current setting on the LCD display.
The +/- keys can be used to alter the current setting. + selects YES, - selects NO.
Pressing both + and - calls up the default setting which is NO.
When ‘NO’ is selected the MIDI Out sends the data from the UC16.
When YES is selected the MIDI Out sends the MIDI data received from USB.
The status of MIDI OUT FROM USB will be saved in non-volatile memory and restored when the
UC16 is switched on again. The factory default is set to NO.
9. SPECIFICATIONS
1. Control
: Switches: (CHANNEL ASSIGN, MEMORY, CONTROL ASSIGN, CONTROL SELECT,
POWER ON/OFF, Numeric Keys (0-9), PRESET BUTTONS 1-4, + AND - KEYS)
3. Rotary Controls: 16 rotary controls with assignable controller and channel values
5. Memory storage - non volatile, 25 banks, 4 fast presets
6. Display
: 3 digit LED
7. Jack
: DC IN (DC 9V), MIDI OUT, USB
8. Dimension
: 29.6cmX12.5cmX4.8cm
9. Weight
: 0.75Kg
Note: Specifications are subject to change without prior notice.
