Evolution S355 MCS, Original Instructions Manual, Page: 11 / 64

11
www.evolutionpowertools.com
EN
15. Disconnect tools
before servicing; when
changing accessories, such as blades, bits, cutters,
and the like.
16. Reduce the risk of unintentional stating.
Make sure switch is in off position before plugging
in.
17. Use recommended accessories.
Consult the
owner’s manual for recommended accessories.
The use of improper accessories may cause risk of
injury to persons.
18. Never stand on the tool
serious injury could
occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
19. Check damaged parts. Before further use
of the tool, a guard or other part that is damaged
should be carefully checked to determine that it
will operate properly and perform its intended
function - check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.
20. Direction of feed.
Feed work into a blade
or cutter against the direction of rotation of the
blade or cutter only.
21. Never leave tool running unattended.
Turn
power off. Don’t leave the tool until it comes to a
complete stop.
GETTING STARTED UNPACKING
Caution:
This packaging contains sharp objects.
Take care when unpacking. Remove the machine,
together with the accessories supplied from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all
the accessories listed in this manual. Also make
sure that all the accessories are complete. If any
parts are found to be missing, the machine and its
accessories should be returned together in their
original packaging to the retailer.
Do not throw the packaging away;
keep it safe throughout the guarantee period.
Dispose of the packaging in an environmentally
responsible manner. Recycle if possible.
Do not let children play with empty plastic bags
due to the risk of suffocation.
SERIAL NO. / BATCH CODE
The serial number can be found on the motor
housing of the machine.
For instructions on how to identify the batch
code, please contact the Evolution Power Tools
helpline or go to:
www.evolutionpowertools.com
ITEMS SUPPLIED
Description Quantity
Instruction Manual 1
14” (355mm) Mild Steel TCT Blade 1
Double ended hex key
5mm/8mm (Blade Change)
1
V-Block 3
Cutting head assembly 1
Base/table assembly 1
Rail bracket and fixings 1
Thumb screws 3
Top clamp 1
Clamp cross bar 1
Front clamp 2
REPLACEMENT BLADES
Description Part No
14” (355mm)
Multi-Material Cutting
TCT Blade
(UK/EU) RAGEBLADE-
355MULTI
(USA) RAGE355BLADE
14” (355mm)
Diamond Blade
(UK/EU) RAGEBLADE-
355DIAMOND
(USA) 14BLADEDM
14” (355mm) Mild Steel
Cutting Blade
(UK/EU) M355TCT-66CS
(USA) 14BLADEST
14” (355mm) Stainless
Steel Cutting Blade
(UK/EU) S366TCT-90CS
(USA) 14BLADESS
14” (355mm) Thin Steel
Cutting Blade
(UK/EU) T355TCT-90CS
(USA) 14BLADETS
14” (355mm)
Aluminium/ Aluminum
Cutting Blade
(UK/EU) A355TCT-80CS
(USA) 14BLADEAL
14” (355mm) Wood
Cutting Blade*
(USA) GW355TCT-60
*Complies with EN 847-1