Evolution Fury 3, Original Instructions Manual, Page: 13 / 208

(3.5)
MITRE SAw SpECIFIC SAFETY
The following specific safety instructions for
Mitre Saws are based on the requirements of
EN 61029-2-9:2012+A11.
BLADE SAFETY
wARNING:
Rotating Saw Blades are
extremely dangerous and can cause serious
injury and amputation. Always keep fingers
and hands at least 150mm away from the
blade at all times. Never attempt to retrieve
sawn material until the cutting head is in the
raised position, the guard is fully closed and
the saw blade has stopped rotating. Only use
saw blades that are recommended by the
manufacturer and as detailed in this manual
and that comply with the requirements of
EN 847-1
Do Not use saw blades that are damaged or
deformed as they could shatter and cause serious
injury to the operator or bystanders.
Do Not use saw blades that are manufactured
from high speed steel (HSS).
If the table insert becomes damaged or worn it
must be replaced with an identical one available
from the manufacturer as detailed in this manual.
(3.6)
pERSONAL pROTECTIVE
EQUIpMENT (ppE)
Hearing protection should be worn in order to
reduce the risk of induced hearing loss.
Eye protection should be worn in order to
prevent the possibility of the loss of sight from
ejected chippings.
Respiratory protection is also advised as some
wood and wood type products especially MDF
(Medium Density Fibreboard) can produce
dust that can be hazardous to your health. We
recommend the use of an approved face mask
with replaceable filters when using this machine
in addition to using the dust extraction facility.
Gloves should be worn when handling blades
or rough material. Heat resistant gloves should
be worn when handling metallic materials
which may be hot. It is recommended that saw
blades should be carried in a holder wherever
practicable. It is not advisable to wear gloves
when operating the mitre saw.
13
www.evolutionpowertools.com
EN