Evolution Evotherm H5RO-I Installation And Operation Manual Download Page 1

Page: 1 / 4

EVOTHERM

HEAT PUMP CONTROLLERS

Installation and Operation Manual for

EVOTHERM HEAT PUMP CONTROLLERS

H5RO-I

1.0

FOREWORD

1.1

The H5RO-I controller is designed to operate a filter pump when circulation is called for

by either the chlorinator or heater.

1.2

This controller is designed for a system that includes a filtration timer, and where the

heater has a Priority to Heat function (Heat Demand).

1.3

CAUTION

: This appliance is not intended for use by young children or infirm persons

without supervision.

1.4

Note: Ideally, as with all pool equipment, the controller should be installed out of direct

weather.

Summary of Contents for Evotherm H5RO-I

Page 1: ...s called for by either the chlorinator or heater 1 2 This controller is designed for a system that includes a filtration timer and where the heater has a Priority to Heat function Heat Demand 1 3 iCAU...

Page 2: ...O I controller output labelled HEATER to the Heat Demand Contact located on the heater unit 2 4 2 Check with the heater manufacturer for correct interlocking procedure 2 4 3 The Heater Output is for l...

Page 3: ...CHLORINATOR CONTROLLER SWITCHING LEAD H5RO I CONTROL BOX PRIORITY TO HEATING OUTPUT CELL HOUSING BACKWASH LINE FILTER POWER OUTLET PUMP POWER NON RETURN VALVE TO HEAT DEMAND CONTACT HEAT PUMP 3 WAY VA...

Page 4: ...e is still no display send the controller for repair Pump will not start The pump will only ever run for the purpose of automatic heating if the pool is below the temperature limit set in the heater o...