3
5.0
CLEANING
5.1
To clean the filter cartridge element, carry out the following procedure:
1. Unscrew the filter lid locking ring and remove the lid off the filter tank. In some cases
where pressure has built up you will need to release air from the tank using the air bleed
screw before removing the lid.
2. Remove the cartridge element from the filter tank.
3. Using a garden type hose clean the surface of the pleated elements. Make sure to
clean between the pleats.
4. Place the cartridge element back into the filter tank ensuring that it is seated
correctly.
5. Ensure the lid o-ring is correctly seated on the lid groove, and lubricate with a
suitable silicone lubricant if required.
6. Push the lid onto the tank and screw the locking ring down.
7. Refer to the start up procedure to recommence operation.
5.2
It is suggested that you should periodically remove the cartridge element and soak it
overnight in a suitable cartridge cleaning compound. Soaking can aid with the extraction
of debris not removed by hosing down the element.
5.3
Cleaning intervals depend upon the swimming pool’s condition and use. Intervals
between cleaning the element should not exceed a period of 12 months in any instance.
Fig. 1
Flow diagram.
Summary of Contents for Evoclear Trim Series
Page 7: ...5 7 0 NOTES...
