Evolution Black 255 Original Instructions Manual Download Page 6

(1.3)

  

IMPORTANT

Please read these operating and safety 
instructions carefully and completely. For 
your own safety, if you are uncertain about 
any aspect of using this equipment please 
access the relevant Technical Helpline, 
the number of which can be found on 
the Evolution Power Tools website. We 
operate several Helplines throughout our 
worldwide organization, but Technical 
help is also available from your supplier.

WEB  

www.evolutionpowertools.com/register

EMAIL

[email protected]

(1.4) 
Congratulations on your purchase 
of an Evolution Power Tools Machine. 
Please complete your product registration 
‘online’ as explained in the A4 online 
guarantee registration leaflet included 
with this machine. You can also scan the 
QR code found on the A4 leaflet with 
a Smart Phone. This will enable you to 
validate your machine’s guarantee period 
via Evolutions website by entering your 
details and thus ensure prompt service 
if ever needed. We sincerely thank you 
for selecting a product from Evolution 
Power Tools.

EVOLUTION LIMITED GUARANTEE

Evolution Power Tools reserves the right 
to make improvements and modifications 
to the product design without prior notice. 
Please refer to the guarantee registration 
leaflet and/or the packaging for details of 
the terms and conditions of the guarantee.

(1.5)

  

Evolution Power Tools will, within the 
guarantee period, and from the original date of 
purchase, repair or replace any goods found to 
be defective in materials or workmanship. This 
guarantee is void if the tool being returned 
has been used beyond the recommendations 
in the Instruction Manual or if the machine 
has been damaged by accident, neglect, or 
improper service.

This guarantee does not apply to machines 
and / or components which have been altered, 
changed, or modified in any way, or subjected 
to use beyond recommended capacities 
and specifications. Electrical components 
are subject to respective manufacturers’ 
warranties. All goods returned defective shall 
be returned prepaid freight to Evolution Power 
Tools. Evolution Power Tools reserves the right 
to optionally repair or replace it with the same 
or equivalent item. 

There is no warranty – written or verbal – for 
consumable accessories such as (following list 
not exhaustive) blades, cutters, drills, chisels 
or paddles etc. In no event shall Evolution 
Power Tools be liable for loss or damage 
resulting directly or indirectly from the use 
of our merchandise or from any other cause. 
Evolution Power Tools is not liable for any 
costs incurred on such goods or consequential 
damages. No officer, employee or agent of 
Evolution Power Tools is authorized to make 
oral representations of fitness or to waive any 
of the foregoing terms of sale and none shall 
be binding on Evolution Power Tools. 

Questions relating to this limited guarantee 
should be directed to the company’s head 
office, or call the appropriate Helpline number.

6

www.evolutionpowertools.com

Summary of Contents for Black 255









































Reviews: