manualshive.com logo in svg

Evolution Aqua eaReefPro 1200S, Installation And Instruction Manual, Page: 1 / 28

Share
Download
Evolution Aqua eaReefPro 1200S Installation And Instruction Manual Download Page 1

INSTALLATION AND INSTRUCTION MANUAL FOR

 

eaReefPro 1800S / 1500S / 1200S / 900S / 600SCube Aquariums

Evolution Aqua Ltd. - 

Evolution House - Kellet Close - Wigan - Lancashire - United Kingdom - WN5 0LP

t 

+44 (0) 1942 216554 - 

f

 +44 (0) 1942 418 489 - 

e

 [email protected] - 

w

 www.evolutionaqua.com

UK

English

EAREEFPRO11501181MAN

PLEASE READ

 all of the instruction manual before attempting 

to set-up your new eaReefPro Aquarium

IMPORTANT 

Never attempt to clean the aquarium with a sharp, 

blade-like object as this may damage the silicone bond 

and invalidate the warranty.

CARE

This product requires Manual Handling.

Know your limitations before lifting!

For guidance please refer to: 

hse.gov.uk/toolbox/manual.htm

IMPORTANT 

It is important to ensure that any water that is spilled 

onto the cabinet is wiped off and dried immediately. 

Failure to do so will invalidate the warranty 

Summary of Contents for eaReefPro 1200S





























Reviews:

No comments