MOVING WASH 3x15C Manual Ver. 1.02
Page 14
To set the pan to reverse
.
Press the
MENU
until it shows
RPOF
.
.
Use the
UP/DOWN
buttons show
RPON
, press
ENTER
to confirm.
To set the tilt to reverse
.
Press the
MENU
until it shows
RTOF
.
Use the
UP/DOWN
buttons show
RTON
, press
ENTER
to confirm.
To set the LED readout to 180
°
,rotating
.
Press the
MENU
until it shows
RDOF.
.
Use the
UP/DOWN
buttons show
RDON
, press
ENTER
to confirm.
Resume reverse Windows default
.
Press the
MENU
until it shows
DFON
.
.
press
ENTER
to confirm
。
o
Auto Mode
Setup single-desk light`s autocephaly moving mode(auto-running)
.
Press the
MENU
until it shows
AU01
.
Use the
UP/DOWN
buttons to set to
AU01
or
AU02 ,
Press
ENTER
to confirm.
Setup single-desk light`s autocephaly moving mode(sound control)
.
Press the
MENU
button until it shows
SNOF
.
.
Use the
UP/DOWN
buttons to set to
SNOF
,press
ENTER
to confirm.
o
DMX Mode
DMX mode is selected in the main menu.
You can control the projectors individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
st
DMX channel).
Note. If 2 MOVING WASH are addressed with same DMX value, they will move exactly the same way.
