Evolite HYBRID 18R, User Manual, Page: 8 / 39

8
5.8
MAINTENANCE
Before starting any maintenance work or cleaning the projector,cut off power from the mains
supply.After switching off, any part of the luminaire can not be disassembled within 10
minutes in order to avoid burns. If you need to replace the bulb, you have to wait 20 minutes
to avoid burns.
。
5.9
TO PREVENT BURNING OR FIRE
15M
1.Please do not install lamps directly on the surface of ordinary combustible materials.
2.Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3.The equipment must be installed away from flammable and explosive materials.The
shortest distance between the equipment and the flammable material is 0.5 meters.
4.The equipment should be projected range of 15 meters away objects and projectiles
temperature less than 60 ° C.
5.Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
6.Do not place any object on the lens.
7.Handling at least allow the device to cool for 20 minutes.
8.Do not use non - original accessories.
6. PACKAGE
Packed with fly-case of two in one ,or carton .Attach follow accessory.
CONTENT QUANTITY
USER MANUAL
1
OMEGA CLAMP 2
6.2
TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the lock catch position
need lock in the center, and the fixture keep in vertical state.
6.3
PACKING
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
2.Before clean the fixture, make sure X, Y axis protect lock closed.
3
、
After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4.After packed the product, put the accessory into the accessory case, then closed and lock
the fly-case.