HeavyFog 1200 Manual Ver. 1.1
Page 10
Maintenance & service
o
Cleaning
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
o
Troubleshooting
Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:
The fixture does not work
o
Check the connection of power and main fuse.
Not responding to DMX controller
o
Check DMX connectors, cables to see if link properly.
o
Check the address settings and DMX polarity.
o
If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the fixture or the previous
one.
o
Try to use another DMX controller.
o
Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to
DMX interface circuit.
o
Check the fluid level in the tank
Technical Specifications
Model
HeavyFOG 1200
Fluid
Fog Fluid water base only
Voltage
230v 50Hz
Power consumption:
1200W
Packaging size / G.W.
450 x 250 x 220 mm
/ 16 kg
