ArchiTECH 150 BAT Manual Ver. 1.00
Page
23
Establish wireless communication between WIFI control of mobile phone and WIFI control of lights
according to 3.5.3.
Set the wireless DMX signal of the first light to the sending state (Master), and the wireless DMX signal
of other lights to the receiving state (Slave).
When the Slave is set to DMX512 control mode, running auto effect or other static colors on the Master to
realize the wireless master-slave synchronization.
The DMX address code of the Master and Slave can be any data between 001 and 512 without affecting
master-slave online.
Mobile APP Control Mode Settings (WIFI Mode)
Find
【
Shows
】
menu and press
【
ENTER
】
to enter auto mode setting.
Press
【
UP/DOWN
】
button to select
【
Wifi Mode
】
.
As shown in Figure 1, "NO WIFI" is displayed below the WIFI icon, indicating that the lamp has NO APP control
function.
As shown in Figure 2, "Led_XXX" is displayed below the WIFI icon, indicating that the lamp with Mobile APP
WIFI control function. XXX on behalf of the three Numbers, is the lamp of WIFI address.
The
【
LED LAMP
】
APP should be installed on mobile phone first. After find the menu
【
HELP
】
and press to
enter, the information query bar appears, find the QR code, scan it with your phone and install the APP.
Lights display function switch to
【
Wifi Mode
】
, as shown in Figure 2.
Open the Settings icon on the phone, find WIFI and search WIFI address, and the words beginning with LED
appear. For example, "LED-XXX", click the link.
Open the
【
LED LAMP
】
APP installed on the phone and display the successful link to control it.
Note:
Under the menu of
【
Shows
】
, the status indicator is on normal blue. At this time, the light as the master to
transmit data, at same wireless signal the slave can be wireless master-salved synchronization.
