Wiring diagram:
SPECIFICATION:
Rated voltage: 220V
Rated frequency: 50Hz
Input power: 40W
Size Fan: 16
’’
40CM
Rules for safe operation:
1.
Before use read these installation and operation manual carefully
2.
Please match the power with the rated voltage and frequency of the fan.
3.
D
on’t insert fingers, pencils or any
other objects through the grille when the fan is running.
4.
Disconnect always the power when you move the fan.
5.
Unplug the power plug before cleaning the fan.
OVER-HEAT PROTECTION FUNCTION:
A thermostat is built in the motor of the fan. The fuse will be automatically cut out when the motor
temperature exceed the limit caused by any accidents. The plastic pieces will be well protected for
burning out and distortion.
ASSEMBLY INSTRUCTIONS
BASE AND CHASSIS ASSEMBLY:
1.
Remove the base and the chassis from the box
2.
Click the chassis in the basis and screw it to the bottom
BLADE AND GRILLES ASSEMBLY:
4.
Remove the spinner and the plastic nut from the front side of the
motor shaft. Then tighten the plastic nut. (FIGURE 1)
Schematic wiring diagram