1300 859 933
www.evoheat.com.au
Evo150-1 Manual
Page 2
1. Introduction
This manual contains information relating to the installation, troubleshooting, operation, and maintenance of this
EvoHeat unit. Instructions in this manual must always be followed. Failure to comply with these recommendations will
invalidate the warranty. Should you have any questions or require technical support, call the EvoHeat office on 1300
859 933 to speak to our team.
The data and information contained in this manual is correct at the time of publishing and is subject to change without
notice. For the most up to date manual, contact EvoHeat directly.
TECHNICAL DATA
Evo150-1
The EVO 150-1 is the next evolution in water heating with
advanced energy efficiency technologies and built-in
smart features to ensure you’re provided with clean, safe,
and economical hot water all year round.
Conforms to AS 3498-2009 Australia and New Zealand
Measurement conditions: Instant heating: Ambient air temperature
20°C/15°C, water inlet 15°C, water outlet 55°C, highest setting
temperature: 75°C
Working Temp Range
1.
Ambient temperature is -5°C ~ 43°C (Heat Pump)
2.
The max temperature of water tank is 70
Operating parameters: The range of the operating water pressures:
0.15~0.85MPa
Storage Capacity
L
150
Max Temperature Setting
˚C
60
Power Input
kW
0.45
Heating Output
kW
1.7
C.O.P at 20
˚
C Air
3.76
Noise Rating
dB(A)
45
Running Current
A
1.88
Power Supply
220-240V/1/50Hz
Water Inlet/Outlet Size
mm
20 (3/4”)
Auxiliary Heating
kW
1.5
Operating Temperature Range
˚C
-5 to 43
Hot Water Recovery
L/hr
36
With Hydro Boost
L/hr
66
Net Weight
kg
91
2. Dimensions
Evo150-1
A
B
C
D
E
DIAMETER
1623.5
1118
427
895
795
568
Summary of Contents for EVO150-1
Page 1: ......