COMMISSIONING
1.
Press and hold for one second to power on the unit.
2.
Press the
arrows to adjust the desired temperature (recommended @ 60°C)
3.
To set the time:
a.
Press
once so the clock starts flashing,
b.
Press
again until just the hour starts flashing,
c.
Use
to adjust the hour and press
to confirm,
d.
Repeat this process for the minute, day, month and year
e.
Allow the screen to time out to confirm the setting, or press
at any stage to cancel the operation.
4.
To set the heating mode:
a.
Press
until
is displayed. This will activate “Eco Heating”
(Heat Pump only) mode and will
provide the most efficient heating.
b.
During periods of unusually high hot water demand (such as additional occupants staying with you),
you can activate “Dual Heating” mode
by pressing
until
is displayed.
5.
In any event where there is a failure within the system, the Electric Element can be engaged with “one push
activation” of the
button until
is displayed. This will provide emergency water heating until
service can be attended.
FOR ADDITIONAL INFORMATION PLEASE REFER TO THE OWNERS MANUAL OR