1300 859 933
www.evoheat.com.au
CS-i Series Manual
Page 8
5. Operation
5.1 The Controller
To lock or unlock the
screen, use the code 022.
1
ON/OFF
Start up or shut down the unit
2
PARAMETER
View the unit state and the parameter
3
CLOCK
Set the clock or turn the timer on/off. When the timer is on, this button is green
4
FAULT DISPLAY
View fault history
5
SILENT SETTING
Turn on/off silent function and set timing of the Low speed function
6
MODE
Enter mode settings and the target temp. settings interface
7
TEMP. CURVE
View temp. and power curve
8
WATER INLET TEMP.
Enter mode settings and the target temp. settings interface
9
LOCK
Lock or unlock the screen.
5.2 Operating Functions
EvoHeat have developed a YouTube Channel with video walkthroughs of the different controller
functions. Scan the QR code or head to our channel to view the videos we have available
https://www.youtube.com/evoheat
5.2.1 Startup & Shutdown
To turn the unit on or off, press the ON/OFF
button.
5.2.2 Setting the Mode & Target Temperature
In the main interface, click the MODE
button or
WATER INLET TEMP. (8) button to get the following menu:
Choose from the modes: Refrigeration mode (1), Automatic
mode (2) or Heating mode (3).
Note: When the unit is designed for single automatic mode or single
thermal mode, the mode cannot be switched.
From this screen, pressing the temperature (4) will allow
you to adjust it as desired
.
Summary of Contents for CS-i 250
Page 1: ......
