background image

Operating Instructions

 

To determine and establish your particular safety limits, practice bending, reaching 
and transferring activities in several combinations in the presence of a qualified health 
professional before attempting active use of the Mighty Bariatric wheelchair. 

ALWAYS check hand grips for looseness before using the Mighty Bariatric wheelchair. 
If loose and/or worn, replace immediately. 
If the Mighty Bariatric wheelchair is exposed to extreme temperature (above 38°C or 
below 0°C), high humidity and/or becomes wet, prior to use, ensure hand grips DO 
NOT twist on the Mighty Bariatric wheelchair handle—otherwise damage or injury 
may occur. 

DO NOT attempt to reach objects if you have to move forward in the seat as this may 
tip the wheelchair. 
DO NOT attempt to reach objects if you have to pick them up from the floor by 
reaching down between your knees as this may tip the wheelchair. 
DO NOT lean over the top of the back upholstery to reach objects behind you, as this 
may tip the wheelchair. 
DO NOT shift your weight or sitting position toward the direction you are reaching, as 
this may tip the wheelchair. 
DO NOT tilt the Mighty Bariatric wheelchair without assistance. 
DO NOT use an escalator to move a wheelchair between floors—serious injury may 
occur. 
NEVER leave an unoccupied Mighty Bariatric wheelchair on an incline. 
DO NOT attempt to stop a moving Mighty Bariatric wheelchair with the wheel locks. 
Wheel locks are not brakes. 
Before attempting to transfer in or out of the Mighty Bariatric wheelchair, every 
precaution should be taken to reduce the gap distance. Turn both castors parallel to 
the object you are transferring onto.  When transferring to and from the Mighty 
Bariatric wheelchair, ALWAYS lock both hand brakes (locks) before transferring to and 
from the Mighty Bariatric wheelchair. 
DO NOT sit or transfer into the Mighty Bariatric wheelchair unless it is fully open. 
DO NOT operate on roads, streets or highways. 
DO NOT climb, go up or down ramps or traverse slopes greater than 9°. 
DO NOT attempt to move up or down an incline which has a film of water, ice or oil on 
it. 
DO NOT attempt to ride over kerbs or obstacles.  Doing so may cause your Mighty 
Bariatric wheelchair to tip, causing bodily harm or damage to the wheelchair. 
DO NOT over tighten hardware attaching to the frame. This could cause damage to 
the frame tubing.

 

Summary of Contents for LM9808













Reviews: