Concetto Evo
Cleaning Guide
CLEANING MILK COMPONENTS
COFFEE DISPENSING SPOUT & CAPPUCCINATORE
Remove the upper protection cover by pulling it outwards.
Remove the fork and the crema adjusting lever.
Unscrew the lower knob to remove the lower protection cover.
Remove the fitting connecting the milk tube to the Cappuccinatore
connector, then remove the milk dispensing spout and the milk tube.
Remove the Cappuccinatore casing and the
Cappuccinatore body cap.
Remove the temperature adjusting lever.
Remove the coffee dispensing spout by
pulling it outwards and dismantle it.
Wash all parts in cleaning solution using a small brush.
Use only milk system and coffee machine-specific products.
Follow the dosing directions on the product packaging.
Make sure to mechanically remove all visible residues and
films
Rinse with running water and thoroughly dry all the parts.
Reinstall all parts in reverse order.
1
4
5
7
6
8
9
10
2
3
2
3
TUBES CLEANING CYCLE
1
Immerse the milk tube into a container with water and press on the Milk button.
(
Fig. 1
)
Do not use hot water.
During the cleaning cycle process, clean the cooling unit with a soft cloth.
(
Fig. 2
)
At the end of the cycle, remove and empty the container.
Do not drink this water.
Replace the milk tube inside cooling unit.
Make sure the milk tube is correctly positioned so it is supplied with milk.
Cafection | Evoca recommends using Milk System Cleaning Tablets from Evoca, or equivalent
cleaning product.
Make sure to always follow the product manufacturer’s instructions.
RECOMMENDED PRODUCT
Product code: 962961
CLEANER
4
Fig. 1
Fig. 2
Technical Support: 800-561-6162 # 310
21DOC09 Rev. 1 / 2022-09
Upper Protection
Cover
Fork
Crema Adjusting Lever
Cappucc. Body Cap
Cappucc. Casing
Milk Tube
Coffee Dispensing
Spout
Lower Protection
Cover
Temp. Adjusting Lever
Cappucc. Connector
Milk Dispensing Spout
