EVOC P12 Series, Manual

Page: 21 / 131

Installing the Product
· 12 · P12 SERIES
3. Installing the Product
3.1 Installation Information
Before installing the PC,please read the following installation instructions:
Note
When installing the product in the switch cabinet, please observe the assembly guidance,
related DIN/VDE requirements and specific regulations of the country/region.
3.2 Mounting Method
□ 19 ″ Rack Mount □ Desktop ■ Embedded Panel
□ Wall Mount ■ VESA Standard Arm □ Portable
□ Other___________
3.2.1 Embedded Panel Installation
Step1: Insert the machine
vertically into the
already-prepared square hole
panel, as shown in the left picture.
Note:Screws for installing the
mounting hook are the
accessories enclosed with the
product.
Step 2: Hang the hooks on the
back of the machine, then tighten
the long screws, which press
fimly against the panel.
Note: The installation
requirements are as the
following table