Chapter 3 BIOS Setup
NET-1821VD2N
- 31 -
SATA Configuration
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
IDE Legacy / Native Mode Selection
[Native]
Serial ATA Port 1 Empty
Serial ATA Port 2 Empty
Serial ATA Port 3 Empty
Serial ATA Port 4 Empty
Serial ATA Port 5 Empty
Serial ATA Port 6 Empty
→←
：
Select Screen
↑↓
：
Select Item
Enter
：
Select
+/-
：
Change Opt
F1
：
General Help
F2
：
Previous Values
F3
：
Optimized Defaults
F4
：
Save
ESC
：
Exit
Version 2.15.1227. Copyright (C) 2012,American Megatrends, Inc.
SATA Controller(s)
Switch of SATA Controller(s).
SATA Mode Selection
SATA controller type selection, corresponding to three options: IDE, RAID and
AHCI.
Note: when choosing AHCI or RAID Mode to implement system installation, the
relevant drivers of the Floppy device and specific chipset are required.
IDE Legacy / Native Mode Selection
Mode selection for IDE controller, corresponding to Native and Legacy.
Serial ATA Port 1
～
6
SATA Port1 ~ 6 dynamically detect whether there are SATA devices on motherboard.
If devices are connected with the corresponding ports, then it will display the SATA
device type. Otherwise, it will display “Empty”.
