Assembly and Maintenance
MEC-5007 SERIES
- 25 -
5.3.2 Removing the Motherboard
Item
Description
Item
Description
1
Screw
2
CPU heat sink
3 Bolt 4
Chassis
body
5 Motherboard
Removing the motherboard:
1
、
Pull out the IO cables and power cable from the motherboard;
2
、
Remove the IO cables above the motherboard on the rear panel;
3
、
Remove the fixing bolts for the external IO ports of the motherboard on the rear
panel;
4
、
Remove the two screws on the PCI-E converter board;
5
、
Remove the two fasteners on the PCI-E converter board;
6
、
Pull out the PCI-E converter board by the upward direction;
7
、
Remove the four screws fixing the CPU heat sink;
8
、
Take out the CPU heat sink by the upward direction;
9
、
Remove the four bolts around the CPU;
10
、
Remove the six screws fixing the motherboard;
11
、
Take out the motherboard.
Applicable products: MEC-5007/MEC-5007-02**/MEC-5007-03**
Summary of Contents for MEC-5007 Series
