EVOC EC7-1817LNAR User Manual Download Page 78

Page: 78 / 112

Chapter 2 Installation

EC71817LNAR

Step 3: Please connect the 15pin SATA power connector (black) to the SATA hard
disk.

Step 4: Please connect the SATA data cable to the SATA hard disk.

Hot Unplug

Step 1: Uninstall the hard disk from the device manager.

Step 2: Unplug the data cable from the SATA hard disk.

Step 3: Unplug the SATA 15pin power connector (black) from the SATA hard disk.

LAN Port

The board provides one 10/100/1000Mbps LAN port, LAN1, which supports

WakeonLAN, LAN PXE booting and AMT7.0 functions. ACTLED and LILED are

the green and dualcolor LEDs beside the Ethernet port, which respectively indicates

the activity status and the speed of LAN. Please refer to the status description for each

LED:

Summary of Contents for EC7-1817LNAR

















































































































Search results

Summary of Contents for EC7-1817LNAR

Reviews:

Related manuals for EC7-1817LNAR

Brands by name

Popular brands

EVOC EC7-1817LNAR, User Manual

Search results

Summary of Contents for EC7-1817LNAR

Reviews:

Related manuals for EC7-1817LNAR

Brands by name

Popular brands