Chapter 3 BIOS Setup
- 44 -
EC5-1817LNAR
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership
change should be claimed by EHCI driver
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass storage device Start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor
Super IO Configuration
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Super IO Configuration
Super IO Chip NCT6776F
Serial Port 0 Configuration
Serial Port 1 Configuration
→←
: Select Screen
↑↓
: Select Item
Enter: Select
+/-: Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc.
