EVOC EC4-1812CLDNA, Manual, Page: 15 / 68

Chapter 2 Installation
EC4­1812CLDNA ­ 11 ­
Network Interface
LAN1 is a 2×7Pin (2.0mm) device pin. This pin­style interface is the
10/100/1000Mbps Ethernet port on motherboard and the transfer cable is required to
connect the interface signals to the standard socket. The table below shows the pin
definitions of the interface.
Pin Signal Name Pin Signal Name
1 MX0+ 2 MX0­
3 MX1+ 4 MX1­
5 MX2+ 6 MX2­
7 MX3+ 8 MX3­
9 GND 10 GND
11 L 12 LINK_LED­
LAN1
13 14 ACT_LED­
When use the transfer cable to connect the interface signals to the standard socket of
RJ45 interface. Please refer to the status description for each LED as follow:
LILED
(Dual­Color: Y/G)
LAN Speed
Indicator
ACTLED
(Single Green)
LAN Activity
Indicator
Green 1000Mbps
Flash Data Transmitting Yellow 100Mbps
Off No Data to Transmit Off 10Mbps
Power Interface
PWR1 is a 1×8Pin power device pin and the transfer cable is required to connect the
interface signals to the standard socket. The table below shows the pin definitions of
the interface.