BIOS Setup
EC0-1818-C236
· 45 ·
USB transfer time-out
This option is used to set maximum time duration for data transmission on
USB2.0. If within the time duration, the transmission is not completed, it will
report error to EFI. This setup is only effective to EFI, not effective to USB
drive under OS.
Device reset time-out
This option is to set maximum time duration need to save device reset on
USB2.0 bus. Within the time duration, EFI will check whether storage device
can receive command. If the time is out, it is regarded as a storage device error.
Device poer-up delay
This option is to set USB device power-up delay, which means it can be
accessed after the delay. If it is set to “Auto”, the data is acquired from the
device; if it is set to “Manual”, users need to enter time by themselves.
Chassis Intrusion Configuration
This option provides configuration related to chassis intrusion detection.
