EVOC CPC-1817CLD5NA, User Manual

Page: 62 / 105

Chapter 1 Product Introduction
CPC-1817CLD5NA - 5 -
Watchdog Function

255 levels, programmable by minute or second;
 Supports watchdog timeout interrupt or reset system.
Operating System
 Supported OSs: Windows XP and Vxwork;
 Unsupported OSs: Windows 2000.
On-board I/O
 Three serial ports: one serial port on-board supports RS-232 mode while the
other two serial ports are rear wired to the rear I/O board and support
RS-232/RS-422/RS-485 mode selection;
 Three SATA connectors: one is the SATA hard disk connector on-board while
the other two SATA connectors are rear wired to the rear I/O board;
 One CF card connector (the CF card connector and the SATA hard disk
connector are alternative);
 Six USB2.0 ports: two are USB2.0 ports on-board while the other four USB2.0
ports are rear wired to the rear I/O board;
 Two PS/2 keyboard/mouse connectors: one is on-board and the other is rear
wired to the rear I/O board (the two connectors are alternative).
Tips: how to identify the alarms
1. Long “beep” indicates system memory error;
2. Short “beep” indicates to power on the computer.