BIOS Setup
COM-1816CLNA
· 31 ·
PCH LAN Controller
To enable or disable onboard LAN port.
Restore AC Power Loss
This option could set the system status when the computer is re-electrified after
powered off under AC.
*
Power Off
S5 status: The system needs to be manually powered on after it is connected
to AC power supply.
*
Power On
S0 status: The system is automatically powered on when it is connected to
AC power supply.
*
Last State
Whether the system returns to S0 or S5 status depends on the status when
the computer is disconnected from AC power. For example, if the computer
is at power-on status (S0 status) when it is disconnected from AC power, the
computer will be powered on automatically when it is connected to AC
Summary of Contents for COM-1816CLNA
Page 1: ...COM 1816CLNA 基于 QM87 芯片组的 COM 主板 COM Motherboard Based on QM87 Chipset Version C01 ...
Page 14: ...安装说明 COM 1816CLNA 7 2 2 接口位置示意图 在板背面 ...
Page 50: ...驱动程序安装说明 COM 1816CLNA 43 4 驱动程序安装说明 本产品的驱动程序可依据配套光盘内容安装 在此不做介绍 ...
Page 74: ...Installation Instructions COM 1816CLNA 7 2 2 Port Location On the back of the board ...
