4. EXPOSURE
5. DAY / NIGHT
(1) AGC (Auto Gain Control)
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 20dB.
(
※
Default)
- MIDDLE: Allows automatic gain control from 0 to 30dB.
- HIGH: Allows automatic gain control from 0 to 42dB.
※
The higher the gain level, the brighter the screen becomes
while the higher the noise as well.
(2) SHUTTER
A. AUTO : The shutter speed is controlled automatically.
(
※
Default)
B. FLK : Please select FLK mode when flickering occurs
on the screen, due to an imbalance between
illumination and frequency.
C. FIXED : The shutter speed is controlled manually.
- You can select the speed from ‘1/60’ to ‘1/90,000 sec.
(NTSC), ‘1/50’ to ‘1/90,000 sec. (PAL).
- You can select Digital Slow Shutter. (DSS) between
x2 ~ x512.
※
Please use FIXED mode only when the light level of the
surveillance area is fixed all the time.
(3) SENS-UP
- Low light sensitivity is greatly improved with the use of
this function.
- Low light sensitivity level is adjustable from 2 to 512 times.
- When SEN-UP level is higher, the picture becomes
brighter while noise is increased at the same rate of
SENS-UP.
ON : Adjustable SENS-UP level between x2 ~ x512.
OFF: SENS-UP is disabled.
※
Default setting is <x8>
It is used to improve the sensitivity and clarity of picture quality
at low light.
- DAY : The image is always displayed in color.
- NIGHT : The image is always displayed in black
and white.
- AUTO1 : The image is automatically converted to
B/W from Color at 3 lux.
IR WDR LEVEL : Select Anti - IR saturation level
among OFF/LOW/MIDDLE/HIGH
IR WDR ADJUST : Adjust the value in each of selected
level - 0 ~ 6
- AUTO2 : The image is automatically converted to
B/W from Color at 3 lux.
D/N LEVEL : LOW/MIDDLE/HIGH
FILTER DLY : Select the duration time about changing
the Day/Night mode. (1 SEC, 3 SEC,
5 SEC, 10 SEC, 15 SEC, 30 SEC, 60 SEC)
NIGHT BURST : Burst ON/OFF selectable.
INITIAL SET : Initialize all settings of AUTO2 menu.
Default setting
- Infrared camera: AUTO1
- Non-Infrared camera: AUTO2
☞
Note
When the SHUTTER is set to MANUAL mode, SENS-UP does not operate.
When the AGC is set to OFF, SENS-UP does not operate.
(4) INITIAL SET
Initialize all settings of EXPOSURE menu.
(5) SAVE
Save the settings
<MAIN MENU>
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
WDR
ATW
DISABLED
ON
RET
<EXPOSURE MENU>
AGC
SHUTTER
SENS-UP
INITIAL SET
SAVE
LOW
AUTO
X8
<EXPOSURE MENU>
AGC
SHUTTER
SENS-UP
INITIAL SET
SAVE
LOW
AUTO
X8
<EXPOSURE MENU>
AGC
SHUTTER
SENS-UP
INITIAL SET
SAVE
LOW
AUTO
X8
<MAIN MENU>
1. LENS
2. EXPOSURE
3. DAY/NIGHT
4. WDR/BLC/ECLPS
5. WHITE B AL
6. 2D-DNR
7. 3D-DNR
8. EFFECTS
9. SPECIAL
10. EXIT
DC IRIS
AUTO1
WDR
ATW
DISABLED
ON
RET
<D/N AUTO1 MENU>
IR WDR LEVEL
HIGH
IR WDR ADJUST
SAVE
3
<D/N AUTO2 MENU>
D/N LEVEL
FILTER DLY
NIGHT BURST
INITIAL SET
SAVE
MIDDLE
1SEC
OFF
<D/N AUTO2 MENU>
D/N LEVEL
FILTER DLY
NIGHT BURST
INITIAL SET
SAVE
MIDDLE
1SEC
OFF
