4/38
3 General information
This manual is intended for personnel specifically assigned to the installation and/or management
and/or repair the system.
Any handling, maintenance, repair and sanitising of equipment must be carried out by
properly trained authorized technicians.
The location housing the system, accessories and consumables must adhere to the storage, use,
and safety regulations currently in force.
The water produced by each unit should be used for the specific use to which it was intended.
EVO-WATER is not responsible for the consequences of improper use of the water produced by
his equipment. Any abnormal operation of the system must be immediately reported to the evo-
water Service Centre. The manufacturer is not responsible for the consequences of continued use
of a system with malfunctions.
Where necessary, the selection, dosage, and handling of chemicals must be performed by
qualified personnel in accordance with the instructions and safety data sheets.
Any maintenance or repairs should be carried out while the system is both electrically and
hydraulically isolated. Disposal of waste material or consumables must be in accordance with local
regulations. The packaging materials (plastic bags, polystyrene foam, etc.,) must not be left within
reach of children as they are potential sources of danger. The system must not be removed from
its original location by a non-specialist. To clean the system, do not use corrosive acids, steel wool
or steel brushes. Do not wash the appliance by directly pouring water or with high-pressure jets.
The manufacturer declines any liability for damage to persons or property caused by non-
observance of the instructions in this manual.
The manufacturer declines any liability for any damage caused to persons or property for repairs
not performed by qualified personnel, this shall void the warranty, as shall the lack of necessary
care and maintenance of the system and the replacement of parts with non-original components.
Under current legislation, the device must be connected to a socket with an effective ground.
The unit operates at 230V -50Hz; voltage variations greater than 10% of the nominal value can
damage the electrical components.