7
EVM Solutions (Pty) Ltd 210 Main Street, Somerset West, Western Cape, South Africa, 7130
Support : 07 28 42 42 82
www.evx.co.za
Document Number: 200-2022-305-3
Charging
the
battery
onboard
FIGURE
2:
CHARGER
CONNECTED
TO
THE
ESCOOTER
Insert the main charger plug (1) into the charging port of the e-Scooter.
Insert the charger AC power plug (2) into a home 220/230V AC power socket, and the
battery starts charging when the charger indicator LED (3) start to blink green.
The charger will automatically start charging if the battery needs to be charged.
The battery is fully charged when the charger indicator light (3) changes from blinking
green to static green.
When the charger is charging the battery, the indicator LED will blink green When the
charger is complete, the charger will stop blinking and will just be GREEN.
Charging takes between 1 and 5 hours, depending on battery size and initial charge level.
(see verifying battery charge level further in the document)
When the pack is fully charged, disconnect the charger from the wall.
Remove the charger plug from battery and close the rubber dust cap. Use your battery often
so it exercises the cells and is kept healthy
Caution:
Ensure a correct electrical plug is fitted to the electrical cord of the charger.
Do not charge he battery with any charger which is not supplied or approved to charge your e-
Scooter.
Do not place anything over the charger or cover its body while it is charging.
The charger can become warm during charging.
Do not use the charger in wet areas or in rain.
Do not drop the charger or subject to high vibration.
