Evinrude E25DELSES, Operator'S Manual, Page: 24 / 80

21
X
O
PERATION
Move the shift lever to NEUTRAL. Refer to
Shifting and Speed Control - Tiller Models
on page 26.
1. NEUTRAL
Twist throttle grip to slowest idle position.
1. Slowest idle position
TILLER ROPE MODELS
While seated, grasp the starter handle and
pull slowly until the starter engages, then pull
hard. Repeat, if needed, until outboard starts.
To prevent damage to starter assembly, allow
starter cord to rewind before releasing starter
handle.
1. Starter handle
2. NEUTRAL
If your outboard does not react normally to
this starting procedure or if it fails to start, re-
fer to
Troubleshooting on page 55.
TILLER ELECTRIC MODELS
Start Button
While seated, press the start button. (If
equipped with a key switch, it must be in the
ON position.) Crank the engine no longer than
20 seconds.
1. Start button
IMPORTANT: The starter motor can be dam-
aged if operated continuously for more than
20 seconds.
WARNING
Always shift to NEUTRAL before start-
ing the outboard to prevent sudden
boat movement, which can cause
injury.
DO NOT advance the throttle before start-up.
Advancing the throttle overrides the electron-
ic idle control system.
If the outboard is started with the throttle ad-
vanced, the outboard will be in a safety
mode.
It will not respond to throttle until the throttle
twist grip is returned to slowest IDLE position.
1
007006
1
007007
007008
1
2
007009
1
007010