background image

31

30

REPAIR PROCEDURE

Pursuit Marketing, Inc. (PMI, Inc.), extends a Limited Lifetime Warranty to the original purchaser
of the paintball marker that the product is free from defects in materials and workmanship.
PMI, Inc.’s obligation under this warranty shall be limited to repairing or replacing any part of
the product which is defective. Service for this replacement or repair will be done free of charge
upon delivery of the product to Pursuit Marketing, Inc. (PMI, Inc.), 55 Howard Ave, Des Plaines,
IL 60018 USA; Customer pays shipping charges. Please call PMI, Inc., at 1.800.579.1633 for
information on obtaining warranty service or to obtain a Return Authorization (RA) number
before shipping product to PMI, Inc.

Do not mail your marker in without first obtaining an RA number. Please make sure to
ship your marker through a shipping company that allows you to track and insure
your package. PMI is not responsible for guns that never reach us. Clearly mark your
RA number on the outside of the package.

WARRANTY EXCLUSIONS AND 

LIMITATIONS

This warranty does not apply in the event of misuse or abuse of the product, use of any parts
other than original factory parts, or unauthorized repairs, modifications, or alterations, and 
does not apply to any parts that are made defective by modification, misuse, abuse, or 
accident. This warranty does not apply to o-rings, cup seals, springs, normal fading of anodized 
finish, scratches, cosmetic wear, or to any items or parts not manufactured by PMI, Inc.

Other than as expressly stated herein, PMI, Inc., does not make any warranties, express or
implied, including but not limited to implied warranties of merchantability or fitness, for any
purpose other than that for which the EVIL OMEN

was designed. This warranty gives you 

specific legal rights. You may have other rights which may vary from state to state. PMI, Inc.,
is not liable for any consequential damages or incidental damages which may arise from the
use or operation of the EVIL OMEN

or from any breach of the warranty herein set forth.

WARRANTY REGISTRATION FORM

Please fill out entirely the enclosed EVIL OMEN

Warranty Registration form found in the center

of this manual and mail it to: Pursuit Marketing, Inc., 55 Howard Ave, Des Plaines, Illinois
60018 USA.

The EVIL OMEN

is a registered trademark. Design rights & all rights reserved.

All patterns, drawings, photographs, instructions or manuals remain the
intellectual property of the manufacturer. Patents pending. All rights will be
strictly enforced.

ORIGINAL SALES PURCHASE RECEIPT OR
PACKING SLIP

Save your original sales purchase receipt or packing slip. A copy must accompany the marker if 
warranty repairs are needed. Evil takes pride in manufacturing high quality paintball products for
many years of trouble free enjoyment. Should you experience any difficulty in operating or 
maintaining this paintball marker, please re-read the operator’s manual carefully. If further 
assistance is needed, contact PMI, Inc., at 1.800.579.1633.

WARRANTY REPAIR RETURN PROCEDURE

A returned product must be accompanied by a Return Authorization (RA) number on the outside of
the box; please call PMI, Inc., at 1.800.579.1633 to obtain an RA number before shipping product to
PMI, Inc. All warranty returns must be accompanied by the operator’s name, address, telephone 
number and a copy of the receipt. Include operator’s fax and e-mail if possible. Operator must remove
all paintballs and completely drain air system before shipping, and must pack product securely to
avoid damage during shipping.

Include a brief description of what does not appear to work

correctly.

Ship to: PMI Inc., 55 Howard Ave, Des Plaines, Illinois 60018 USA. Most lost or delayed

guns are the result of not including an RA number. Do not ship your OMEN

to PMI without first

obtaining an RA number.

OUT OF WARRANTY REPAIR

Should repairs be needed on a paintball marker that is out of warranty, contact PMI at
1.800.579.1633 for information regarding authorized EVIL OMEN

repair facilities.

Any paintball marker returned to PMI for out of warranty repairs must be accompanied by an RA 
number, description of what does not appear to work correctly, and operator’s information requested
in “Warranty Repair Return Procedure” above. Including sales purchase receipt or packing slip is
optional for out of warranty repairs. Please note that there will be a minimum labor charge of 

$

20.00

and there may be additional charges for parts to repair an item/product that is not covered by 
warranty. An estimate of repair cost will be provided to the customer and authorization to complete
the repairs will be obtained prior to repairs being done.

WARRANTY

Omen Manual 2.0   6/21/05   9:56 AM   Page 30

Summary of Contents for OMEN 2.0


















Reviews: