E2638-PID
Rev 10.03.2021
Removing the electrode stack and lamp
NOTE! Always use the Electrode Stack Removal Tool to remove the electrode stack; any
other tools may damage your PID and invalidate your warranty.
To remove the electrode stack, proceed as follows:
1.
Gently remove the sensor from the equipment.
2.
Place the PID, pellet side down, onto a clean surface.
3.
Locate the electrode stack removal tool into the two slots on the sides of the PID
and squeeze together until the electrode stack and lamp are released.
4.
Carefully lift the PID body away from the pellet and lamp.
5.
Occasionally the lamp may be temporarily lodged in the cell and will need to be
freed carefully with tweezers.
6.
Occasionally the small spring behind the lamp will come out when the lamp is
removed from the sensor. Simply place it into the sensor house.
Electrode stack removing tool Electrode stack
29
