E2615-H
2
S
Rev 24.08.2022
Electrical connections
The terminals on the E2615 series devices are suitable for a wide range of wires with a
cross-section of 0.2...1.5 mm
2
. We recommend to strip the wire end by 8...9 mm and use
wire end sleeves.
To connect the wire, loosen the screw, insert the wire end into the terminal hole and tighten
the screw.
The analog output can be changed between 4-20 mA and 0-10 V type using jumper on the
transmitter’s PCB.
8
