Note: It can work as a pure switch that connects to non-PoE
devices.
1.
Install the media cable for network connection.
2.
Port 5 to 8 are pure TP ports for non-PoE devices.
2-1-2. Cabling Requirements
To ensure a successful installation and keep the network performance
good, please take a care on the cabling requirement. Cables with worse
specification will render the LAN to work poorly.
2-1-2-1. Cabling Requirements for TP Ports
For Fast Ethernet TP network connection
The grade of the cable must be Cat. 5 or Cat. 5e with a maximum length of
100 meters.
This device supports MDI/MDI-X auto-crossover, so both types of cable,
straight-through and cross-over can be used.
Straight-through cable: pin-outs for RJ-45 connector 1,2,3,6 to 1,2,3,6
Cross-over cable: pin-outs for RJ-45 connector 1,2,3,6 to 3,6,1,2
8-Port Fast Switch with 4 PoE
VoIP Phones
Security Cameras
PD
WLAN AP’s
Email Server
6
Fig. 3 Network Connection
Fig. 2 PSE to PD or PoE Splitter
