EVGA Z370 FTW (134-KS-E377)
- 11 -
1.
CPU 12v. Error LED
a.
RED: Voltage failure. The LED will remain on when the motherboard
detects an initialization failure in the CPU 12v. power connector. (This
may be caused by a failure to connect an 8-pin ATX/EPS power
connector, a power supply failure, or a failure with the CPU 12v.
connector)
2.
CPU Error LED
a.
RED: CPU error (This may be caused by improper installation, failed
CPU, or damage to the socket).
3.
Memory Error LED
a.
RED: Memory initialization failed. (This may be caused by improper
memory module installation or failed memory.)
4.
5VSB
a.
WHITE: Voltage detected (Does not mean PSU is outputting in-spec;
only that this specific voltage is detected)
5.
PCIe LED for PE2. The LED will remain on when this PCIe slot detects an
initialization failure in PE2.
6.
PCIe LED for PE4. The LED will remain on when this PCIe slot detects an
initialization failure in PE4.
7.
POST Code Indicator
a.
After bootup, this will display the CPU temperature.
b.
During boot, this LED will cycle through many different hexadecimal
POST codes with a range of 00-FF to indicate which aspect of the Power
On Self Test (POST) is currently running.
i.
For list of POST Codes, please see Page 126.
1. CPU 12v. Error LED
4. 5VSB
7.
POST Code Indicator
2. CPU Error LED
5. PCIe LED for PE2
3. Memory Error LED
6. PCIe LED for PE4
LED Component Legend
