EVGA Z270 Stinger User Manual Download Page 88

Page: 88 / 128

EVGA Z270 Stinger (111-KS-E272)

- 88 -

Realtek HD Audio Manager

The Z270 STINGER and Stinger both use a 7.1 Realtek ALC1150 audio controller.

This section will cover installation of the controller (in Windows 10) and the basic

configuration options that are available in the software.
To begin, use your installation DVD or download the current Realtek drivers form

www.evga.com/support/download

. Once the zip file is downloaded, right-click the file

to extract it, and run the correct 32-bit or 64-bit executable for your operating system.
Once launched, select “Next” on the extraction window, “Next” on the installation

window, then select “Yes, I want to restart my computer now.” Click “Finish.”

Summary of Contents for Z270 Stinger

































































































































Search results

Summary of Contents for Z270 Stinger

Reviews:

Related manuals for Z270 Stinger

Brands by name

Popular brands

EVGA Z270 Stinger, User Manual

Search results

Summary of Contents for Z270 Stinger

Reviews:

Related manuals for Z270 Stinger

Brands by name

Popular brands