EVGA T2 Series, User Manual

Page: 7 / 48

5
Q&A
750W / 850W / 1000W / 1200W TITANIUM
Power Supply User Manual
English
Q: I see there are more than 4 screw holes on the back of the power supply, but the packaging only offers (4)
screws, are some missing ?
A: Nothing is missing ; you will only need to attach the EVGA power supply to the case with 4 screws. The power
supply offers more than (4) holes to provide optimal compatibility for today’s varied case designs.
Q: My EVGA Power Supply includes (2)
EPS cables
for my motherboard, do I need to connect up both?
A: Motherboards
only require (1) 4+4 or 8-Pin EPS connection
, on some models, an additional 4+4-Pin or 8-Pin
connection on the motherboard may be found for dual CPU configurations or for extreme overclocking . If your
motherboard support dual 4+4-Pin EPS connections, please refer to your
motherboard manufacturer’s manual
for
details on the proper function and power if the EPS connections.
Q. What is the ECO Thermal Control System ?
A. The ECO Thermal Control System , when enabled, allows the fan on your EVGA power supply to shut off
during low to moderate operation loads. The EVGA power supply’s fan will automatically turn back on when
needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed,
based on the load operation being requested from the components connected. This prevents unnecessary
rotation,
reduces ambient noise
levels and will
increase the life span
of the fan due to the fan not spinning when
not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also
increase in RPM as needed automatically, based on the power draw from attached components.
Q. What if I want to use power adapters for my video card(s)/motherboard/peripherals?
A. EVGA always recommends the use of
direct power connections
from the power supply to power the video
card(s), motherboard connections and other auxiliary power connections for optimal power distribution.
Q. Does it matter
which end of the cable
I plug into the power supply?
A: Yes, the connections going to the power supply, will not have “break downs” like the EPS (CPU) has 4+4 on one
side and full 8-Pin on the other. Another example is the 24-Pin cable, you can see on the PSU side it is a total of
28 Pins, where the 24-Pin connection will go to the motherboard directly.
Check each cable as it is labeled
appropriately to match the power supply side and connect only the same
‘‘matching”
cable directly to the power
supply as referenced on each connector.
Q. If I have an issue or a question, can I get support?
A: ALL EVGA products are backed by top tier warranties as well as
technical support. Support can be reached for
your power supply at:
- USA:
+1-888-881-3842 option 1, option 3. or contact us via email at support@evga.com .
- Europe: +49 89 189 049 11 or by email via eu.evga.com/support .